ConwayLife.com - A community for Conway's Game of Life and related cellular automata
Home  •  LifeWiki  •  Forums  •  Download Golly

Adding odd numbered Wolfram 1D rules to Golly

For discussion of other cellular automata.

Adding odd numbered Wolfram 1D rules to Golly

Postby ynotds » January 19th, 2011, 5:56 am

All done with a pair of Perl scripts. The first creates rule tree files for W1 through W255 (odd only):
#!/usr/bin/perl
# Create Wn.trees for odd numbered Wolfram 1D Rules 1-255
# by Tony Smith, Meme Media, Melbourne, Australia, January 2011
# extends Golly/Rules/TreeGenerators/RuleTreeGen.pl
# using Mark Jeronimus's approach of a next line of state 2 cells

use strict;

my ( @bits, %world, $nodeseq, @r, @params );

my $numStates = 3 ;
my $numNeighbors = 8 ;

my $numParams = $numNeighbors + 1 ;

for ( my $odd = 1; $odd < 256; $odd += 2 ) {
  my $rule = $odd;
  foreach my $bit ( 0 .. 7 ) { $bits[$bit] = $rule & 1; $rule = $rule >> 1 }
  %world = ();
  $nodeseq = 0;
  @r = ();
  @params = (0) x $numParams;
  recur($numParams);
  open ( NEW, '>', "W$odd.tree" ) || die "Cannot open file for output!";
  print NEW "num_states=$numStates\n";
  print NEW "num_neighbors=$numNeighbors\n";
  print NEW "num_nodes=", scalar @r, "\n";
  print NEW "$_\n" for @r ;
  close NEW;
}

sub f {
   my ($nw, $ne, $sw, $se, $n, $w, $e, $s, $c) = @_ ;
   if ( $nw == 2 or $n == 2 or $ne == 2 ) { return 2 } # allow widening patterns
   elsif ( $c != 2 ) { return $c }                     # past rows
   else { return $bits[ 4 * $nw + 2 * $n + $ne ] }     # next row
}

sub recur {
  my $at = shift;
  return f(@params) if $at == 0;
  my $n = $at;
  for (my $i=0; $i<$numStates; $i++) {
     $params[$numParams-$at] = $i;
     $n .= " " . recur($at-1);
  }
  return $world{$n} if defined($world{$n});
  $world{$n} = $nodeseq;
  push @r, $n;
  return $nodeseq++;
}
Yeah I know I could have just zipped up the rule tree files but it might be good if more people found out how easy they can be to make, the way I did in a last minute rush before a recent conference presentation. You need to run that first script and move/copy the files it generates to your Rules folder. The second needs to go in the Golly/Scripts/Perl folder:
# Validates 1D rule/seed combination and adds next line indicator cells.
# Author: Tony Smith (ts@meme.com.au), January 2010.

use strict;

g_exit( 'There is no pattern.' ) if g_empty();
my $rulestring = g_getrule();
my ( $rule, $bounds ) = split( ':', $rulestring );
g_exit( 'Only for odd W rules.' ) unless $rule =~ s/W// and $rule > 0 and $rule < 256 and $rule % 2 == 1;
my @seedrect = g_getrect();
g_exit( 'Seed pattern must be only one cell high.' ) unless $seedrect[3] == 1;
my $cells = g_getcells( @seedrect );
if ( scalar @$cells % 2 ) { # may contain some state 2 cells
  my @replace;
  while ( scalar @$cells ) {
    my @cell = splice( @$cells, 0, 3 );
    $cell[2] = 1 if $cell[2] == 2; # convert any state 2 to state 1 in case seeded by randfill
    push( @replace, @cell );
  }
  g_putcells( \@replace );
}
my $width = g_getwidth();
my ( $left, $right );
if ( $width ) { # bounded
  $left  = - int ( $width / 2 );
  $right = $width + $left;
}
else { # unbounded
  $left  = $seedrect[0] - 1;
  $right = $seedrect[0] + $seedrect[2];
}
for ( my $x = $left; $x < $right; $x ++ ) { g_setcell( $x, $seedrect[1] + 1, 2 ) }
This script expects you to have a one cell high seed pattern with at least some state 1 or state 2 cells and converts any state 2 to state 1 in case you had populated them with Edit>Random Fill. It then adds a line of state 2 cells beneath your seed to indicate where the Wnnn.tree rule needs to apply the Wnnn rule. The length of that line is based on the width of your seed unless you have a bounded grid. Once you have done that you just start generation as you would for the built in even Wnnn rules.
User avatar
ynotds
 
Posts: 31
Joined: August 23rd, 2010, 8:38 am
Location: Melbourne, Australia

Re: Adding odd numbered Wolfram 1D rules to Golly

Postby 137ben » January 19th, 2011, 4:56 pm

Cool, could you make one for python as well?
137ben
 
Posts: 343
Joined: June 18th, 2010, 8:18 pm

Re: Adding odd numbered Wolfram 1D rules to Golly

Postby ynotds » January 19th, 2011, 10:01 pm

137ben wrote:Cool, could you make one for python as well?

Perl is like prostrate cancer. Us old programmers mostly die with it, not from it.

All I know about python :wink: (Warning 15Mb animation.)
User avatar
ynotds
 
Posts: 31
Joined: August 23rd, 2010, 8:38 am
Location: Melbourne, Australia


Return to Other Cellular Automata

Who is online

Users browsing this forum: No registered users and 3 guests