ConwayLife.com

... and release glider from the sendwitched spiral or the bistable switch to start the signaling. But be carefull with rebuilding, there is ... 4B89.4B102.5B47.4B12.2A$21.5B6.3B8.A113.4B84.4B87.4B104.4B46.5B34.5B 6.3B8.A113.4B84.4B87.4B104.4B46.5B34.5B6.3B8.A113.4B84.4B87.4B104.4B ...

... objects (like block position in semisnark, boat/block in bistable switch) I use 4 for comments/toughts. In automated placing of conduits I ... .C56.2C22.2B3.A2.A17.2B34.2B3.2A25.2B3A27.BC22.2B4.A19.2B365.A3.A2.A 86.2A29.2A53.A3.3A116.2A239.2A178.A.A87.2A61.A25.A58.2A2.A87.A.A25.A ...

... 32.4B31.A2.A4BA$250.3B33.4B29.2A2.A3BA$250.BA2B33.4B28.4B2.3B$249.BAB AB34.4B29.BAB.2A$249.A2BAB35.4B27.BABA.B$248.2B2A5B33.4B23.2A.B2A2B$ 248.10B33.4B22.2A7B$248.6B.4B33.4B22.7B$246.2AB.3B3.4B33.4B21.7B868.A ... to generate the salvo. ... so I have modified my local pslmake to switch to mono when ...

... spaceship ECCA. There is already p256 gun in it, but bistable switch multiplexer cannot be used due to slow reset. Therefore the main cycle ... 4B31.E2.E.E.E.E.2E90.10B.4B2.4B$435.4B34.BEBEBE.E94.10B.4B2.4B$434.4B 36.B2EBE.E95.10B.4B2.4B$433.4B38.2B.BE97.10B.4B2.4B$432.4B38.3B101. ...

... 16.6B32.4B124.10B8.4B57.4B30.4B58.4B2.4B$149.4B18.4B34.4B53.2B68.3B2A 5B9.4B57.4B30.4B58.4B2.4B$148.4B18.6B34.4B5.D3.3D3.3D34.BAB61.2A3.4B ... -- 751 blocks DBCA fire codon bistable switch (g0%1)[542] (g1%2)[539] (g1%2)[531] (g1%2)[547] (g0%2)[547] (g1%2)[536] ...

... we instead place it on the redundant output lane of the bistable switch (allowing us to remove the eater shown in red): x = 190, y = 187, ... 48.4B38.4B$15.4B41.4B50.4B36.4B$14.4B41.6B50.4B34.4B$13.4B41.8B50.4B 32.4B$12.4B41.4B2.4B50.4B30.4B$11.4B41.4B4.4B50.4B28.4B$10.4B41.4B6. ...

... we instead place it on the redundant output lane of the bistable switch (allowing us to remove the eater shown in red): x = 190, y = 187, ... 48.4B38.4B$15.4B41.4B50.4B36.4B$14.4B41.6B50.4B34.4B$13.4B41.8B50.4B 32.4B$12.4B41.4B2.4B50.4B30.4B$11.4B41.4B4.4B50.4B28.4B$10.4B41.4B6. ...

... happy for the one block conduit allowing to cross the not 1 line to +/- switch. It prevented several reflectors including Scorbie splitter in the ... 10B.4B2.4B$442.33B30.10B.4B2.4B$441.33B32.10B.4B2.4B$440.33B34.10B.4B 2.4B$439.33B36.10B.4B2.4B$438.33B38.10B.4B2.4B$437.33B40.10B.4B2.4B$ ...

... is not sufficient anyways. I have used slower output of the bisable switch because it has required phase. Unfortuately faster boat hitting glider ... 4B19.4B36.4B52.4B2.4B$225.4B21.4B34.4B54.4B2.4B$224.4B23.4B32.4B56.4B 2.4B$223.4B25.4B30.4B58.4B2.4B$222.4B27.4B28.4B60.4B2.4B$221.4B29.4B ...

There's a different variant of the bistable switch (using an eater5) in the DBCA already; three of them form the cyclic mod-3 ... $194.4B83.4B36.4B52.4B2.4B$193.4B85.4B34.4B54.4B2.4B$192.4B87.4B32.4B 56.4B2.4B$191.4B89.4B30.4B58.4B2.4B$190.4B91.4B28.4B60.4B2.4B$189.4B ...

... stoppers completely, replacing them all with a single bistable switch. This boils down to arranging for one of the CMOS outputs of the switching ... $194.4B83.4B36.4B52.4B2.4B$193.4B85.4B34.4B54.4B2.4B$192.4B87.4B32.4B 56.4B2.4B$191.4B89.4B30.4B58.4B2.4B$190.4B91.4B28.4B60.4B2.4B$189.4B ...

... 4B145.4B38.3B51.4B2.4B$162.4B147.4B36.4B52.4B2.4B$161.4B149.4B34.4B 54.4B2.4B$160.4B151.4B32.4B56.4B2.4B$159.4B153.4B30.4B58.4B2.4B$158. ... binary build my version looks cheaper, but this could be better if we switch to white building by restricted DBCA approach. It should be possible ...

... 74.4B55.4B2.4B$462.4B34.6B4.4B4.4B15.4B25.4B74.4B.3B51.4B2.B.B$461.5B 33.6B6.4B2.4B15.4B27.4B74.8B51.4B2.B2.B$460.8B30.6B8.8B15.4B29.4B73. ... with FireC* having the fork/join to alternate phase with phase switch each cycle. That would be 11 per fire for phase independent instructions ...

... Various stuff based on it: Funky switch (read&reset mechanism by vivi): x = 71, y = 90, rule = Symbiosis 35.A$34.A$34.3A12$2.B.A.2B$3.A.A.B$2.2A.A$3.A.2A$3.A2.A$4.2A11$5.A$4. ... of weird reactions and a flipper x = 103, y = 31, rule = Symbiosis 50.B34.B$48.2B33.2B$49.2B33.2B9$94.B$94.A2$93.2B$93.2B13$AB13.BA9.AB ...

... and stays alive. // // Note that there exist connected patterns in B34678/S12346 and B35678/S123457 // that die in two steps, so both S5 and ... = -1; /* flag for no shift seen yet */ rule r = 0; while (*s != 0) { switch(*s) { case 'b': case 'B': shift = 9; break; case 's': case 'S': shift ...

... both alternate rules if supported examples: rule = Life|HighLife rule = B34/S34|B234/S456 rule = 2/34/5|23/456/5 rule = B24/S123H|B24/SH:T100 rule ... grid size better error reporting when RLE contains invalid characters switch off custom Theme on new pattern load Life 1.05 decoder now ignores ...