It's because the rule needs to be added to the LifeWiki Rule namespace.pzq_alex wrote: ↑June 28th, 2022, 8:17 amThe LifeViewer in viewtopic.php?p=86546#p86532 failed to load, presumably because the preceding ruletable has no actual @RULE line (just the header), or the rule name starts with W.
lifeviewer bug
Re: lifeviewer bug
LifeViewer https://lazyslug.com/lifeviewer
Re: lifeviewer bug
Might be missing something obvious here as I tend to do, but the patterns in this post are showing up as "New Pattern", despite being very much not empty. The rule (Rule:BBM) didn't previously exist, but creating it on the wiki did not fix the issue.
Even more strangely, the following RLE (taken from the post immediately afterwards) shows up as a completely different pattern with completely different behavior from the intended rule:
Maybe "BBM" is being interpreted as something else here?
Even more strangely, the following RLE (taken from the post immediately afterwards) shows up as a completely different pattern with completely different behavior from the intended rule:
Code: Select all
x = 11, y = 17, rule = BBM
5.D4$.H7.B3$2.P5.P$PAQP3.PQDP$2.P5.P3$.B7.H4$5.D!
Re: lifeviewer bug
BBM is a built-in alias for Margolus rule M0,8,4,3,2,5,9,7,1,6,10,11,12,13,14,15.Ian07 wrote: ↑June 28th, 2022, 9:41 pmMight be missing something obvious here as I tend to do, but the patterns in this post are showing up as "New Pattern", despite being very much not empty. The rule (Rule:BBM) didn't previously exist, but creating it on the wiki did not fix the issue.
Maybe "BBM" is being interpreted as something else here?
Help->Info->Pattern will report the alias. Help->Aliases will give you a list of all of the aliases that LifeViewer understands.
Aliases are checked first so you'll need to rename the rule on LifeWiki (and in your pattern) if you want it to be loaded.
LifeViewer https://lazyslug.com/lifeviewer
Re: lifeviewer bug
Identify can make the gen number out of the LOOP range.
Code: Select all
x = 3, y = 3, rule = B3/S23
obo$bo$bo!
[[ LOOP 3 ]]
\sum_{n=1}^\infty H_n/n^2 = \zeta(3)
How much of current CA technology can I redevelop "on a desert island"?
How much of current CA technology can I redevelop "on a desert island"?
Re: lifeviewer bug
True. Identify temporarily disables LOOP while searching.
LifeViewer https://lazyslug.com/lifeviewer
Re: lifeviewer bug
Viewer has stopped working in Chrome 103.0.5060.134 for forums and the CGOL home page for last 24 hours. Works just fine in wiki. Works fine on same PC in Edge everywhere. Works fine on my laptop.
Displays no patterns. Does display "click to control." Yet it seems to run the patterns, just nothing visible but the black viewer.
I deleted all my cached stuff for the CGOL domain. No joy.
Any idea?
Update: and just like that, it is now not working on laptop as well. Same symptoms as desktop. Argh!
Displays no patterns. Does display "click to control." Yet it seems to run the patterns, just nothing visible but the black viewer.
I deleted all my cached stuff for the CGOL domain. No joy.
Any idea?
Update: and just like that, it is now not working on laptop as well. Same symptoms as desktop. Argh!
Phil Bookman
Re: lifeviewer bug
Sorry no idea. It's working fine for me on the same Chrome version. I'm on Windows 11. There haven't been any changes to LifeViewer recently.Book wrote: ↑July 30th, 2022, 7:32 pmViewer has stopped working in Chrome 103.0.5060.134 for forums and the CGOL home page for last 24 hours. Works just fine in wiki. Works fine on same PC in Edge everywhere. Works fine on my laptop.
Displays no patterns. Does display "click to control." Yet it seems to run the patterns, just nothing visible but the black viewer.
I deleted all my cached stuff for the CGOL domain. No joy.
Any idea?
Update: and just like that, it is now not working on laptop as well. Same symptoms as desktop. Argh!
LifeViewer https://lazyslug.com/lifeviewer
Re: lifeviewer bug
Weird! Works fine on Edge, laptop (win 11) and PC (win 10).
Does not work on Chrome (which I uninstalled and reinstalled) on either computer.
Also does not work running PatMan which uses the plugin. Tried an old version of plugin and the latest.
And yet wiki viewers run fine.
So weird.
Update: per Discord, I am not alone. Another weirdness: works fine on Chrome on another Win 10 desktop on the same router.
Does not work on Chrome (which I uninstalled and reinstalled) on either computer.
Also does not work running PatMan which uses the plugin. Tried an old version of plugin and the latest.
And yet wiki viewers run fine.
So weird.
Update: per Discord, I am not alone. Another weirdness: works fine on Chrome on another Win 10 desktop on the same router.
Last edited by Book on July 31st, 2022, 8:15 pm, edited 1 time in total.
Phil Bookman
Re: lifeviewer bug
Since nobody has said it yet, there's no change in Safari. The "sometimes force reload" issue from before never went away, but Safari is not getting what everyone is now reporting is happening in Chrome.
User:HotdogPi/My discoveries
Periods discovered: 5-16,⑱,⑳G,㉑G,㉒㉔㉕,㉗-㉛,㉜SG,㉞㉟㊱㊳㊵㊷㊹㊺㊽㊿,54G,55G,56,57G,60,62-66,68,70,73,74S,75,76S,80,84,88,90,96
100,02S,06,08,10,12,14G,16,17G,20,26G,28,38,47,48,54,56,72,74,80,92,96S
217,486,576
S: SKOP
G: gun
Periods discovered: 5-16,⑱,⑳G,㉑G,㉒㉔㉕,㉗-㉛,㉜SG,㉞㉟㊱㊳㊵㊷㊹㊺㊽㊿,54G,55G,56,57G,60,62-66,68,70,73,74S,75,76S,80,84,88,90,96
100,02S,06,08,10,12,14G,16,17G,20,26G,28,38,47,48,54,56,72,74,80,92,96S
217,486,576
S: SKOP
G: gun
Re: lifeviewer bug
I put in an experimental fix for this in build 721. Please hard refresh your browser and try another Viewer. Check it is on the right build by clicking "Help" and the build number will be displayed at the top.
Please let me know how you get on.
LifeViewer https://lazyslug.com/lifeviewer
Re: lifeviewer bug
Victory! Brilliant! What was it and how did you figure it out?
Note: you have to hard refresh Forum, Home, etc. Wherever you run into the problem.
Phil Bookman
Re: lifeviewer bug
I searched the Chrome bug reports for recent reported issues and found one that looked similar. The report had a test case and potential workaround so I tried that and it worked.
LifeViewer https://lazyslug.com/lifeviewer
Re: lifeviewer bug
Bravo! I assume the plugin will need to be updated.
Phil Bookman
-
- Posts: 173
- Joined: April 1st, 2021, 1:03 am
Re: lifeviewer bug
This pattern mistakenly says "Life ended at generation 3" when it doesn't actually end.
Code: Select all
x = 8, y = 16, rule = 1/4/2super
2T$2T6$2M.2M$2M.2M6$2N.2N.2N$2N.2N.2N!
[[ LABEL 6 0 16 "One block is a block" ]]
[[ LABEL 6 7 16 "Two blocks half a block" ]]
[[ LABEL 6 14 16 "Three blocks no block" ]]
- wirehead
- Posts: 253
- Joined: June 18th, 2022, 2:37 pm
- Location: fish: wirehead: command not found
- Contact:
Re: lifeviewer bug
When I try to run B2-a/S12Super (Just Friends) soup, the glider appears to get "stuck" and then "jump" a bit leaving a gap in the trail. This soup produces two heading NW and NE, and for some reason only the NE glider experiences this glitch.
Code: Select all
x = 38, y = 44, rule = B2-a/S12Super
A.2A2.2A.5A.3A.2A.A3.3A.A2.A.3A$A.A.2A.2A.3A.A4.5A2.A.4A.2A.A$.A8.A.A
.A2.A.5A4.A.6A.A$A3.A.2A.A.A.3A.3A.2A.3A2.6A$A.5A.A2.2A4.2A2.A.2A.A.A
3.2A3.A$.A.2A.A2.2A4.A.2A.3A.A.A.3A3.4A$.2A.A4.4A7.A.2A.4A3.2A$2A3.A3.
A2.A.A.A.2A.A2.2A.7A.A.A$.2A.3A4.A.5A.A.2A2.A.A2.3A.2A.A$.2A.2A6.6A4.
A2.A2.2A.3A.A$A.3A.2A6.2A2.A2.A.A.4A4.A2.2A$6A.A.8A.A3.2A2.A2.2A3.3A$
4A.A.4A.A.A2.A3.2A2.A2.3A.A3.2A$.2A2.2A2.A.4A4.A.A7.4A.3A$3.5A3.3A6.3A
.2A2.A.3A3.2A$.2A3.3A2.2A2.2A.A.A3.A2.4A.A.2A$A.2A.A.2A.A7.A.4A.3A.A.
A2.A$A3.2A.2A3.A.5A.A.5A4.A$A3.3A.2A.A2.3A2.2A4.A.2A.3A3.A$6.3A4.3A2.
4A3.A.A2.5A.2A$3A2.2A5.A.7A5.A.3A.2A.2A$.A2.3A.A3.4A3.A.2A.A4.5A$3.2A
.A.2A.A2.A.A.5A.3A.A.A.A2.3A$.5A.2A2.A2.A.2A.A.2A.A.3A2.A3.A$2A.3A.2A
2.A11.A2.A2.A2.3A$A.2A.A.A.8A2.A.A2.A.A.A.2A.5A$2A.A.A4.A.4A.A.A.A.A.
6A.3A2.A$2.A4.A4.A6.2A3.2A2.A.A2.2A2.A$2A2.2A.5A.A2.3A3.5A.6A$A.A.12A
2.2A4.3A.2A.A2.2A.A$.A.A.A.3A5.A3.A.A2.A.3A.A.A2.3A$2A9.A5.4A.7A.2A.A
3.A$2A.2A.A.2A.A.2A.A3.2A2.A5.7A$.A.4A2.A2.5A2.2A.A.3A3.A.3A.A$4.3A5.
A.4A2.2A.2A.3A.3A2.A.A$.A2.A.A2.3A2.3A2.2A.A.4A.3A$2.A.A.A.5A.A.A.2A4.
A5.6A$2.3A2.A2.4A.4A.A3.3A.A.4A.A.A$.A2.A2.A3.A3.A2.A.A3.2A2.A.A2.A.A
.A$2.A5.2A2.A6.A3.3A4.2A.A.3A$A.3A2.A2.A.A5.3A2.2A2.2A2.3A.A.A$2.A2.4A
.2A2.5A8.A3.2A2.A.A$2A3.4A3.2A3.10A5.A4.A$.A2.2A3.3A.A.A.2A.2A.A.5A2.
A3.2A!
- breaker's glider gun
- Posts: 673
- Joined: May 23rd, 2021, 10:26 am
- Location: the inside of a stuffed anaconda or maybe [click to not expand]
Re: lifeviewer bug
Code: Select all
x = 326, y = 343, rule = B3/S23Super
21.4B83.4B$22.4B83.4B$23.4B83.4B$24.4B83.4B$25.4B83.4B$26.4B83.4B$27.
4B83.4B$28.4B83.4B$29.4B83.4B$30.4B83.4B$31.4B83.4B$32.4B83.4B$33.4B83.
4B$34.4B83.4B$35.4B83.4B$36.4B83.4B$37.4B83.4B$38.4B83.4B$39.4B83.4B$
40.4B83.4B$41.4B83.4B$42.4B83.4B$43.4B83.4B$44.4B83.4B$45.4B83.4B$46.
4B83.4B$47.4B83.4B$48.4B83.4B$49.4B83.4B$50.4B83.4B$51.4B83.4B$52.4B83.
4B$53.4B83.4B$54.4B83.4B$55.4B83.4B$56.4B83.4B$57.4B83.4B$58.4B83.4B$
59.4B83.4B$60.4B83.4B$61.4B83.4B$62.4B83.4B$15.18P30.4B30.90P$15.18P31.
4B29.90P$15.18P32.4B28.155P$15.18P33.4B59.123P$15.18P34.4B58.123P$15.
18P35.4B57.123P$15.18P36.4B56.123P$15.18P37.4B55.123P$15.18P38.4B54.123P
$15.18P39.4B53.123P$15.18P40.4B52.123P$15.18P41.4B51.123P$15.18P42.4B
50.123P$15.18P43.4B49.123P$7.26P44.4B48.123P$7.26P45.4B47.123P$7.26P46.
4B46.123P$7.26P47.4B45.123P$7.26P48.4B44.123P$15.34P33.4B43.123P$15.34P
34.4B42.123P$9.40P35.4B41.123P$9.40P36.4B40.123P$9.40P37.4B39.123P$9.
40P38.4B38.123P$9.40P39.4B37.123P$9.40P40.4B36.123P$9.40P41.4B35.123P
$9.40P42.4B34.123P$9.40P43.4B33.196P$9.40P44.4B32.196P$9.40P45.4B31.196P
$9.40P46.4B30.196P$9.40P47.4B29.196P$9.40P48.4B28.196P$9.72P17.4B59.164P
$9.72P18.4B58.164P$9.72P19.4B57.164P$9.72P20.4B56.164P$9.72P21.4B55.164P
$9.72P22.4B54.164P$9.72P23.4B53.164P$9.72P24.4B52.164P$9.72P25.4B51.164P
$9.72P26.4B50.164P$9.72P27.4B49.164P$9.72P28.4B48.164P$9.72P29.4B47.164P
$9.72P30.4B46.164P$9.72P31.4B45.164P$9.72P32.4B44.164P$9.72P33.4B43.164P
$9.72P34.4B42.164P$9.72P35.4B41.164P$9.72P36.4B40.164P$9.72P37.4B39.164P
$9.72P38.4B38.164P$9.72P39.4B37.164P$9.72P40.4B36.164P$9.72P41.4B35.164P
$9.72P42.4B34.164P$9.72P43.4B33.164P$9.72P44.4B32.164P$9.72P45.4B31.164P
$9.72P46.4B30.164P$9.72P47.4B29.164P$9.72P48.4B28.164P$9.104P17.4B59.
132P$9.104P18.4B58.132P$9.104P19.4B57.132P$9.104P20.4B56.132P$9.104P21.
4B55.132P$9.104P22.4B54.132P$9.104P23.4B53.132P$9.104P24.4B52.132P$9.
104P25.4B51.132P$9.104P26.4B50.132P$9.104P27.4B49.132P$9.104P28.4B48.
132P$9.104P29.4B47.132P$9.104P30.4B46.132P$9.104P31.4B45.132P$9.104P32.
4B44.132P$9.104P33.4B43.132P$9.104P34.4B42.132P$9.104P35.4B41.132P$9.
104P36.4B40.132P$9.104P37.4B39.132P$9.104P38.4B38.132P$9.104P39.4B37.
132P$9.104P40.4B36.132P$9.104P41.4B35.132P$9.104P42.4B34.132P$9.104P43.
4B33.132P$9.104P44.4B32.132P$9.104P45.4B31.132P$9.104P46.4B30.132P$9.
104P47.4B29.132P$9.104P48.4B28.132P$9.136P17.4B59.100P$9.136P18.4B58.
100P$9.136P19.4B57.100P$9.136P20.4B56.100P$9.136P21.4B55.100P$9.136P22.
4B54.100P$9.136P23.4B53.100P$9.136P24.4B52.100P$9.136P25.4B51.100P$9.
136P26.4B50.100P$9.136P27.4B49.100P$9.136P28.4B48.100P$9.136P29.4B47.
100P$9.136P30.4B46.100P$9.136P31.4B45.100P$9.136P32.4B44.100P$9.136P33.
4B43.100P$9.136P34.4B42.100P$9.136P35.4B41.100P$9.136P36.4B40.100P$9.
136P37.4B39.100P$9.136P38.4B38.100P$9.136P39.4B37.100P$9.136P40.4B36.
100P$9.136P41.4B35.100P$9.136P42.4B34.100P$9.136P43.4B33.100P$9.136P44.
4B32.100P$9.136P45.4B31.100P$9.136P46.4B30.100P$9.136P47.4B29.100P$9.
136P48.4B28.100P$9.168P17.4B27.100P$9.168P18.4B26.100P$9.168P19.4B25.
100P$9.168P20.4B24.100P$9.168P21.4B23.100P$9.168P22.4B22.100P$9.168P23.
4B21.100P$9.168P24.4B20.100P$9.168P25.4B19.100P$9.168P26.4B18.100P$9.
168P27.4B17.100P$9.168P28.4B16.100P$9.168P29.4B15.100P$9.168P30.3BA14.
100P$9.168P31.3BA13.100P$9.168P32.3A13.100P$9.168P48.100P$9.168P48.100P
$9.168P48.100P$9.168P48.100P$9.168P48.100P$9.168P48.100P$9.168P48.100P
$9.168P48.100P$9.168P48.100P$9.168P48.100P$9.168P48.100P$9.168P48.100P
$9.168P48.100P$9.168P48.100P$9.168P48.100P$9.168P48.100P$9.316P$9.316P
$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P
$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P
$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P
$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P
$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P$9.316P
$9.316P$9.316P$124.201P$124.201P$124.201P$124.201P$124.201P$124.201P$
124.201P$124.201P$124.172P$124.172P$124.172P$124.172P$124.172P$124.172P
$124.172P$124.172P!
- breaker's glider gun
- Posts: 673
- Joined: May 23rd, 2021, 10:26 am
- Location: the inside of a stuffed anaconda or maybe [click to not expand]
Re: lifeviewer bug
XD try pressing f6 (or maybe don't, it might cause a crash)wirehead wrote: ↑August 4th, 2022, 1:53 pmWhen I try to run B2-a/S12Super (Just Friends) soup, the glider appears to get "stuck" and then "jump" a bit leaving a gap in the trail. This soup produces two heading NW and NE, and for some reason only the NE glider experiences this glitch.
Code: Select all
x = 38, y = 44, rule = B2-a/S12Super A.2A2.2A.5A.3A.2A.A3.3A.A2.A.3A$A.A.2A.2A.3A.A4.5A2.A.4A.2A.A$.A8.A.A .A2.A.5A4.A.6A.A$A3.A.2A.A.A.3A.3A.2A.3A2.6A$A.5A.A2.2A4.2A2.A.2A.A.A 3.2A3.A$.A.2A.A2.2A4.A.2A.3A.A.A.3A3.4A$.2A.A4.4A7.A.2A.4A3.2A$2A3.A3. A2.A.A.A.2A.A2.2A.7A.A.A$.2A.3A4.A.5A.A.2A2.A.A2.3A.2A.A$.2A.2A6.6A4. A2.A2.2A.3A.A$A.3A.2A6.2A2.A2.A.A.4A4.A2.2A$6A.A.8A.A3.2A2.A2.2A3.3A$ 4A.A.4A.A.A2.A3.2A2.A2.3A.A3.2A$.2A2.2A2.A.4A4.A.A7.4A.3A$3.5A3.3A6.3A .2A2.A.3A3.2A$.2A3.3A2.2A2.2A.A.A3.A2.4A.A.2A$A.2A.A.2A.A7.A.4A.3A.A. A2.A$A3.2A.2A3.A.5A.A.5A4.A$A3.3A.2A.A2.3A2.2A4.A.2A.3A3.A$6.3A4.3A2. 4A3.A.A2.5A.2A$3A2.2A5.A.7A5.A.3A.2A.2A$.A2.3A.A3.4A3.A.2A.A4.5A$3.2A .A.2A.A2.A.A.5A.3A.A.A.A2.3A$.5A.2A2.A2.A.2A.A.2A.A.3A2.A3.A$2A.3A.2A 2.A11.A2.A2.A2.3A$A.2A.A.A.8A2.A.A2.A.A.A.2A.5A$2A.A.A4.A.4A.A.A.A.A. 6A.3A2.A$2.A4.A4.A6.2A3.2A2.A.A2.2A2.A$2A2.2A.5A.A2.3A3.5A.6A$A.A.12A 2.2A4.3A.2A.A2.2A.A$.A.A.A.3A5.A3.A.A2.A.3A.A.A2.3A$2A9.A5.4A.7A.2A.A 3.A$2A.2A.A.2A.A.2A.A3.2A2.A5.7A$.A.4A2.A2.5A2.2A.A.3A3.A.3A.A$4.3A5. A.4A2.2A.2A.3A.3A2.A.A$.A2.A.A2.3A2.3A2.2A.A.4A.3A$2.A.A.A.5A.A.A.2A4. A5.6A$2.3A2.A2.4A.4A.A3.3A.A.4A.A.A$.A2.A2.A3.A3.A2.A.A3.2A2.A.A2.A.A .A$2.A5.2A2.A6.A3.3A4.2A.A.3A$A.3A2.A2.A.A5.3A2.2A2.2A2.3A.A.A$2.A2.4A .2A2.5A8.A3.2A2.A.A$2A3.4A3.2A3.10A5.A4.A$.A2.2A3.3A.A.A.2A.2A.A.5A2. A3.2A!
Re: lifeviewer bug
Fixed, thanks!Citation needed wrote: ↑August 4th, 2022, 1:14 amThis pattern mistakenly says "Life ended at generation 3" when it doesn't actually end.
LifeViewer https://lazyslug.com/lifeviewer
- confocaloid
- Posts: 3029
- Joined: February 8th, 2022, 3:15 pm
Re: lifeviewer bug
Press Enter (play), then R (reset), then Ctrl+Y (redo play to ...). It worked for me before, but does not work now.
Code: Select all
x = 36, y = 9, rule = B3/S23
27bo$26b4o$9b2o14b2obobo$bo7bo2bo11b3obo2bo2b2o$o3b2o7bo11b2obobo3b2o$
o5bo6bo12b4o$b5o7bo7bo5bo$9bo2bo9bo$9b2o9b3o!
127:1 B3/S234c User:Confocal/R (isotropic CA, incomplete)
Unlikely events happen.
My silence does not imply agreement, nor indifference. If I disagreed with something in the past, then please do not construe my silence as something that could change that.
Unlikely events happen.
My silence does not imply agreement, nor indifference. If I disagreed with something in the past, then please do not construe my silence as something that could change that.
Re: lifeviewer bug
Fixed, thanks.confocaloid wrote: ↑August 24th, 2022, 1:42 amPress Enter (play), then R (reset), then Ctrl+Y (redo play to ...). It worked for me before, but does not work now.
LifeViewer https://lazyslug.com/lifeviewer
Re: lifeviewer bug
I don't know when this happened (I think it's been at least a week), but I noticed it just now: the Safari page reload issue is no longer existent. The issue I was describing before is gone.
User:HotdogPi/My discoveries
Periods discovered: 5-16,⑱,⑳G,㉑G,㉒㉔㉕,㉗-㉛,㉜SG,㉞㉟㊱㊳㊵㊷㊹㊺㊽㊿,54G,55G,56,57G,60,62-66,68,70,73,74S,75,76S,80,84,88,90,96
100,02S,06,08,10,12,14G,16,17G,20,26G,28,38,47,48,54,56,72,74,80,92,96S
217,486,576
S: SKOP
G: gun
Periods discovered: 5-16,⑱,⑳G,㉑G,㉒㉔㉕,㉗-㉛,㉜SG,㉞㉟㊱㊳㊵㊷㊹㊺㊽㊿,54G,55G,56,57G,60,62-66,68,70,73,74S,75,76S,80,84,88,90,96
100,02S,06,08,10,12,14G,16,17G,20,26G,28,38,47,48,54,56,72,74,80,92,96S
217,486,576
S: SKOP
G: gun
- breaker's glider gun
- Posts: 673
- Joined: May 23rd, 2021, 10:26 am
- Location: the inside of a stuffed anaconda or maybe [click to not expand]
Re: lifeviewer bug
Code: Select all
x = 13, y = 13, rule = LifeHistory
8.A$4.2C.A.A$4.2C4.A$3.A.A4.A$3.C2.2AC$3.C.A.CACA$2C.C.AC2.CA$2C.C.A.
2C2.2A$3.C.A$2.A2.C6.A$3C.2C4.C$5.C2A2C$9.2C!
1:ctrl+a
2:wait until spaceship is away
3:del
4:select a tiny area.
5:hold del or ctrl+a. (perhaps there are other keys to do it, but im not motivated)
it will zoom on the spaceship.
Re: lifeviewer bug
lifeviewer isn't working for me. it displays "click to control", and it seems to run patterns, but i can't see anything but a black screen.
(i think there was a problem very similar to this a month or 2 ago that was caused by something related to a chrome update, if memory serves me right.)
(i think there was a problem very similar to this a month or 2 ago that was caused by something related to a chrome update, if memory serves me right.)
- Christopher D'Agostino
adopted father of the U-turner
the U-turner gallery
255P132
B3/S234z (Zlife)
adopted father of the U-turner
Code: Select all
x = 11, y = 15, rule = B3/S23
9bo$8bobo$8bobo$9bo8$b3o$b3o$obo$2o!
255P132
B3/S234z (Zlife)