lifeviewer bug

Has something gone haywire? Let us know about it!
Citation needed
Posts: 331
Joined: April 1st, 2021, 1:03 am

Re: Lifeviewer Bugs

Post by Citation needed » August 1st, 2024, 6:08 am

b-engine wrote:
August 1st, 2024, 6:06 am
Citation needed wrote:
August 1st, 2024, 6:03 am
The "Sync" button is also missing.
It's at Settings > Clipboard > External Sync.
Thank you.

Citation needed
Posts: 331
Joined: April 1st, 2021, 1:03 am

Re: Lifeviewer Bugs

Post by Citation needed » August 1st, 2024, 6:09 am

The glider should turn red gradually, but an error message came up.

Code: Select all

x = 5, y = 5, rule = ColourisedLife27s
3o$o$bo!
[[ T 1 COLOR 1 0 0 255 ]]
[[ T 100 COLOR 1 255 0 0 ]] 

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: Lifeviewer Bugs

Post by rowett » August 1st, 2024, 6:31 am

Citation needed wrote:
August 1st, 2024, 6:09 am
The glider should turn red gradually, but an error message came up.

Code: Select all

x = 5, y = 5, rule = ColourisedLife27s
3o$o$bo!
[[ T 1 COLOR 1 0 0 255 ]]
[[ T 100 COLOR 1 255 0 0 ]] 
I already answered this in another thread.

Citation needed
Posts: 331
Joined: April 1st, 2021, 1:03 am

Re: Lifeviewer Bugs

Post by Citation needed » August 1st, 2024, 8:11 am

Citation needed wrote:
August 1st, 2024, 6:09 am
The glider should turn red gradually, but an error message came up.

Code: Select all

x = 5, y = 5, rule = ColourisedLife27s
3o$o$bo!
[[ T 1 COLOR 1 0 0 255 ]]
[[ T 100 COLOR 1 255 0 0 ]] 
Will this bug be fixed in the future?
If so, it would be an excellent feature.

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: Lifeviewer Bugs

Post by rowett » August 4th, 2024, 5:27 pm

Citation needed wrote:
August 1st, 2024, 8:11 am
If so, it would be an excellent feature.
I'll put it on the backlog. It's not high priority so it may be a long time before it's added.

User avatar
pifricted
Posts: 538
Joined: May 25th, 2024, 10:26 am
Location: Behind The Great Internet Wall

Re: lifeviewer bug

Post by pifricted » August 5th, 2024, 12:16 am

And LifeViewer can't laod ruletables:
(edit:But this work?)

Code: Select all

x = 1, y = 1, rule = HMtest
!
@RULE HMtest
@TABLE
n_states:7
neighborhood:hexagonal
symmetries:none
var a={0,1,2,3,4,5,6}
var s=a
var d=a
var f=a
var g=a
var h=a
#m birth
1,a,s,6,5,d,f,5
2,4,6,a,s,d,f,6
3,a,s,d,f,5,4,4
#m die
4,a,s,3,5,d,f,2
5,1,6,a,s,d,f,3
6,a,s,d,f,2,4,1
#else m sur...
1,a,s,d,f,g,h,2
2,a,s,d,f,g,h,3
3,a,s,d,f,g,h,1
4,a,s,d,f,g,h,5
5,a,s,d,f,g,h,6
6,a,s,d,f,g,h,4
@COLORS
0 0 0 0
1 127 127 127
2 74 74 74
3 74 74 74
4 0 255 0 
5 0 205 0
6 0 155 0
When T=0, some [R]History cells look like this:
Attachments
bug.PNG
bug.PNG (16.46 KiB) Viewed 6487 times

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: lifeviewer bug

Post by rowett » August 5th, 2024, 1:20 am

pifricted wrote:
August 5th, 2024, 12:16 am
And LifeViewer can't laod ruletables:

When T=0, some [R]History cells look like this:
Both fixed in build 1184. Thanks for reporting!

User avatar
confocaloid
Posts: 4547
Joined: February 8th, 2022, 3:15 pm
Location: https://catagolue.hatsya.com/census/b3s234c/C4_4/xp62

Re: lifeviewer bug

Post by confocaloid » August 6th, 2024, 12:34 am

In build 1185, when selecting some area, future events can depend on the direction in which the selection was performed. The expected behaviour is that the direction of performing a selection should not affect any future events.
  • Select the state-3 Herschel by a movement diagonally from top-left to bottom-right, then press Ctrl+Space to advance selection by one tick. It works.
  • Select the state-3 Herschel by a movement diagonally from bottom-right to top-left, then press Ctrl+Space to advance selection by one tick. It fails with "No live cells to select".
  • Select the state-3 Herschel by a movement diagonally from bottom-left to top-right, then press Ctrl+Space to advance selection by one tick. It fails with "No live cells to select".
  • Select the state-3 Herschel by a movement diagonally from top-right to bottom-left, then press Ctrl+Space to advance selection by one tick. It fails with "No live cells to select".
confocaloid wrote:
August 6th, 2024, 12:27 am
[...]

Code: Select all

x = 55, y = 57, rule = LifeHistory
8.D3.D.D3.D2.3D3.3D2.5D3.D4.3D5.D$8.2D2.D.D3.D.D3.D.D7.D4.2D3.D3.D3.
2D$8.D.D.D.D3.D5.D.D7.D5.D3.D3.D2.D.D$8.D2.2D.D.D.D4.D2.4D4.D5.D4.3D
2.D2.D$8.D3.D.D.D.D3.D3.D3.D3.D5.D3.D3.D.5D$8.D3.D.2D.2D2.D4.D3.D3.D
5.D3.D3.D4.D$8.D3.D.D3.D.5D2.3D4.D4.3D3.3D5.D5$4B$.4B$2.4B$3.4B$4.4B$
5.4B$6.4B$7.4B$8.4B7.A$9.4B6.3A$10.4B8.A$11.4B6.2A$12.4B5.6B12.A$13.
4B6.5B9.3A$14.4B4.7B7.A9.2A$15.4B2.8B7.2A8.A.A$16.14B2.2B.3B3.2A5.A$
17.21B.BA.AB3.2A.2A$13.2A3.22B2A2B2.B.A.A$14.A4.25B.3A2.A$14.A.AB.23B
.BAB2.2A$15.2A22B4.B4A$16.17B.4B5.B.B.A$18.19B7.2A.A.A$9.A10.16B9.A2.
2A$9.3A8.15B8.A.A$12.A7.14B9.2A$11.2A3.B3.13B$11.8B.12B$13.18B$13.17B
$12.17B$10.18B$8.19B$8.2BC15B$7.3BCBC4B.9B$8.2B3C4B2.7B$7.5BC4B4.5B$
6.10B3.5B$5.4B10.2A$5.3B12.A$3.4B10.3A$3.2A12.A$4.A$.3A$.A!
127:1 B3/S234c User:Confocal/R (isotropic CA, incomplete)
Unlikely events happen.
My silence does not imply agreement, nor indifference. If I disagreed with something in the past, then please do not construe my silence as something that could change that.

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: lifeviewer bug

Post by rowett » August 6th, 2024, 5:01 am

confocaloid wrote:
August 6th, 2024, 12:34 am
In build 1185, when selecting some area, future events can depend on the direction in which the selection was performed.
Fixed in build 1186. Thanks for reporting!

unname4798
Posts: 1184
Joined: July 15th, 2023, 10:27 am
Location: On the highest skyscraper

Re: lifeviewer bug

Post by unname4798 » August 10th, 2024, 2:15 pm

Some icons are not showing up.
XRecorder_10082024_211448.jpg
XRecorder_10082024_211448.jpg (264.53 KiB) Viewed 5625 times
This profile is sponsored by Unname Inc. (2022-2024)
Status: none.
Companies: NOT (Nihonium Orange Team)

Citation needed
Posts: 331
Joined: April 1st, 2021, 1:03 am

Re: lifeviewer bug

Post by Citation needed » August 12th, 2024, 7:58 pm

Codd suddenly stopped working. Also, I kept getting signed out of LifeWiki just now.

EDIT: It worked on the phone.
Attachments
Codd rule
Codd rule
LifeViewer bug.jpg (421.68 KiB) Viewed 2837 times

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: lifeviewer bug

Post by rowett » August 13th, 2024, 4:15 am

unname4798 wrote:
August 10th, 2024, 2:15 pm
Some icons are not showing up.
Which browser and device are you using?

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: lifeviewer bug

Post by rowett » August 13th, 2024, 4:16 am

Citation needed wrote:
August 12th, 2024, 7:58 pm
Codd suddenly stopped working. Also, I kept getting signed out of LifeWiki just now.
It's probably related to the "general errors" that have been appearing on the forums recently.

User avatar
confocaloid
Posts: 4547
Joined: February 8th, 2022, 3:15 pm
Location: https://catagolue.hatsya.com/census/b3s234c/C4_4/xp62

Re: lifeviewer bug

Post by confocaloid » August 20th, 2024, 7:55 pm

Crossposting what appears to be a LifeViewer bug (build 1191).

The rulestring "R2,C2,S,B0,2-3,8,NW0101010001000001000101010" appears to be translated into an alternating CA:

Code: Select all

R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
which doesn't match how the strobing CA with B0 but not Smax is supposed to work, and doesn't match how it works in Golly 4.3.

Changing to use custom neighbourhood (N@) instead of weighted neighbourhood also changes evolution of the patterns in LifeViewer build 1191.
CARuler wrote:
August 20th, 2024, 6:46 pm
This is the best rule of its kind that I could find:

Code: Select all

x = 255, y = 186, rule = R2,C2,S,B0,2-3,8,NW0101010001000001000101010
[...]
Edit:
oscillator:

Code: Select all

x = 3, y = 4, rule = R2,C2,S,B0,2-3,8,NW0101010001000001000101010
o$2bo$o$2bo!
Edit2:
this rule certainly has engineering potential

Code: Select all

x = 5, y = 4, rule = R2,C2,S,B0,2-3,8,NW0101010001000001000101010
o3bo$bo2$4bo!
confocaloid wrote:
August 20th, 2024, 6:59 pm
[...] When evolving the original pattern in LifeViewer build 1191, I believe the following rules are actually followed:
  • for odd generations, use B14567/S12345678;
  • for even generations, use B/S167.

Code: Select all

x = 60, y = 60, rule = R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
20bo3bo10bo3bo2$21bo16bo6$20bo18bo12$o7bo42bo7bo$2bo54bo3$o58bo11$o58b
o3$2bo54bo$o7bo42bo7bo12$20bo18bo6$21bo16bo2$20bo3bo10bo3bo!
TL,DR: so far it seems to be a LifeViewer bug. When fixed, the rulestring you specified will no longer be interpreted to refer to the same cellular automaton, and the patterns will no longer work the same way. It seems like your CA can be equivalently defined in the following way:

Code: Select all

R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
127:1 B3/S234c User:Confocal/R (isotropic CA, incomplete)
Unlikely events happen.
My silence does not imply agreement, nor indifference. If I disagreed with something in the past, then please do not construe my silence as something that could change that.

User avatar
confocaloid
Posts: 4547
Joined: February 8th, 2022, 3:15 pm
Location: https://catagolue.hatsya.com/census/b3s234c/C4_4/xp62

Re: lifeviewer bug

Post by confocaloid » August 24th, 2024, 4:02 pm

confocaloid wrote:
August 20th, 2024, 7:55 pm
Crossposting what appears to be a LifeViewer bug (build 1191).

The rulestring "R2,C2,S,B0,2-3,8,NW0101010001000001000101010" appears to be translated into an alternating CA:

Code: Select all

R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
which doesn't match how the strobing CA with B0 but not Smax is supposed to work, and doesn't match how it works in Golly 4.3.
[...]
In case fixing this appears to be too complicated at the moment, could you please temporarily disable support for CA with both B0 and weighted neighbourhood (NW), until this is corrected? The reason is that people are unknowingly posting patterns which rely on an incorrect interpretation of a rulestring with B0 and NW.
127:1 B3/S234c User:Confocal/R (isotropic CA, incomplete)
Unlikely events happen.
My silence does not imply agreement, nor indifference. If I disagreed with something in the past, then please do not construe my silence as something that could change that.

unname4798
Posts: 1184
Joined: July 15th, 2023, 10:27 am
Location: On the highest skyscraper

Re: lifeviewer bug

Post by unname4798 » August 25th, 2024, 1:10 am

confocaloid wrote:
August 24th, 2024, 4:02 pm
confocaloid wrote:
August 20th, 2024, 7:55 pm
Crossposting what appears to be a LifeViewer bug (build 1191).

The rulestring "R2,C2,S,B0,2-3,8,NW0101010001000001000101010" appears to be translated into an alternating CA:

Code: Select all

R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
which doesn't match how the strobing CA with B0 but not Smax is supposed to work, and doesn't match how it works in Golly 4.3.
[...]
In case fixing this appears to be too complicated at the moment, could you please temporarily disable support for CA with both B0 and weighted neighbourhood (NW), until this is corrected? The reason is that people are unknowingly posting patterns which rely on an incorrect interpretation of a rulestring with B0 and NW.
Can you disable emulation on B0 NW rules? They will only work on bounded grids.
This profile is sponsored by Unname Inc. (2022-2024)
Status: none.
Companies: NOT (Nihonium Orange Team)

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: lifeviewer bug

Post by rowett » August 26th, 2024, 4:06 am

confocaloid wrote:
August 24th, 2024, 4:02 pm
could you please temporarily disable support for CA with both B0 and weighted neighbourhood (NW), until this is corrected?
Done.

unname4798
Posts: 1184
Joined: July 15th, 2023, 10:27 am
Location: On the highest skyscraper

Re: lifeviewer bug

Post by unname4798 » August 26th, 2024, 5:03 am

confocaloid wrote:
August 20th, 2024, 7:55 pm
Crossposting what appears to be a LifeViewer bug (build 1191).

The rulestring "R2,C2,S,B0,2-3,8,NW0101010001000001000101010" appears to be translated into an alternating CA:

Code: Select all

R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
which doesn't match how the strobing CA with B0 but not Smax is supposed to work, and doesn't match how it works in Golly 4.3.

Changing to use custom neighbourhood (N@) instead of weighted neighbourhood also changes evolution of the patterns in LifeViewer build 1191.
CARuler wrote:
August 20th, 2024, 6:46 pm
This is the best rule of its kind that I could find:

Code: Select all

x = 255, y = 186, rule = R2,C2,S,B0,2-3,8,NW0101010001000001000101010
[...]
Edit:
oscillator:

Code: Select all

x = 3, y = 4, rule = R2,C2,S,B0,2-3,8,NW0101010001000001000101010
o$2bo$o$2bo!
Edit2:
this rule certainly has engineering potential

Code: Select all

x = 5, y = 4, rule = R2,C2,S,B0,2-3,8,NW0101010001000001000101010
o3bo$bo2$4bo!
confocaloid wrote:
August 20th, 2024, 6:59 pm
[...] When evolving the original pattern in LifeViewer build 1191, I believe the following rules are actually followed:
  • for odd generations, use B14567/S12345678;
  • for even generations, use B/S167.

Code: Select all

x = 60, y = 60, rule = R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
20bo3bo10bo3bo2$21bo16bo6$20bo18bo12$o7bo42bo7bo$2bo54bo3$o58bo11$o58b
o3$2bo54bo$o7bo42bo7bo12$20bo18bo6$21bo16bo2$20bo3bo10bo3bo!
TL,DR: so far it seems to be a LifeViewer bug. When fixed, the rulestring you specified will no longer be interpreted to refer to the same cellular automaton, and the patterns will no longer work the same way. It seems like your CA can be equivalently defined in the following way:

Code: Select all

R2,C0,S1,6-7,B,N@54422a|R2,C0,S1-8,B1,4-7,N@54422a
Can rowett allow B0 NW rules on finite grids (without emulation)?
This profile is sponsored by Unname Inc. (2022-2024)
Status: none.
Companies: NOT (Nihonium Orange Team)

User avatar
confocaloid
Posts: 4547
Joined: February 8th, 2022, 3:15 pm
Location: https://catagolue.hatsya.com/census/b3s234c/C4_4/xp62

Re: lifeviewer bug

Post by confocaloid » August 26th, 2024, 5:20 am

unname4798 wrote:
August 25th, 2024, 1:10 am
unname4798 wrote:
August 26th, 2024, 5:03 am
Why are you repeatedly posting unnecessary ridiculously long quotes, followed by short replies?

This case in particular is ridiculous, because you're basically directing at me questions that only the developer and maintainer of LifeViewer can possibly answer.

@unname4798 I will likely silently report any further posts from you that contain unnecessary overly long quotes, as violations of the forum rule that says that unnecessarily long/nested quotes should be avoided.
127:1 B3/S234c User:Confocal/R (isotropic CA, incomplete)
Unlikely events happen.
My silence does not imply agreement, nor indifference. If I disagreed with something in the past, then please do not construe my silence as something that could change that.

unname4798
Posts: 1184
Joined: July 15th, 2023, 10:27 am
Location: On the highest skyscraper

Re: lifeviewer bug

Post by unname4798 » August 26th, 2024, 7:35 am

Can rowett allow B0 NW rules on a finite grid (without emulation)?
This profile is sponsored by Unname Inc. (2022-2024)
Status: none.
Companies: NOT (Nihonium Orange Team)

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: lifeviewer bug

Post by rowett » August 26th, 2024, 3:30 pm

unname4798 wrote:
August 26th, 2024, 7:35 am
Can rowett allow B0 NW rules on a finite grid (without emulation)?
Probably not. I don't like the strobing.

User avatar
pifricted
Posts: 538
Joined: May 25th, 2024, 10:26 am
Location: Behind The Great Internet Wall

Re: lifeviewer bug

Post by pifricted » August 27th, 2024, 1:49 am

???

Code: Select all

# [[ SQUARECELLS ICONS ]]
x = 41, y = 32, rule = H3LLcircuit
2.BA.AB.2B3AB2AB3.B.A3.3BAB2.A.B.A$B4.A2B.B2.AB2.BA2B.BAB.A.B2A4.A.2B
.AB$4.BA3.A.AB.A5.A.A2.2BAB2.4A.2A2.B$A.AB.A.B4A.ABAB.4A.BAB2.A.A3BA2.
A2B$2B3.3A2B.B3.2BA.2A.3B2.ABA.2A.B.BA3B$B3.B.B2.AB2.B2.B4.B2A.B2.B.B
.2B2.B3.A$B2.B2A.B2.B.2B2.2B.A.2A.B2.A2B3.B2.B$BA.A6.B.B8.2B3.B.AB.3A
2.A2.2A$3A2.B3.B3.A.A.2A3.2BA2.3A.AB.3A.2B$A2.A.2B.2B.A.A.BA2.2A.A3.B
4A2B.B2.AB$A2.A.2B.2A.B.BA2.A.BAB2.B2A2.AB5.B2.BA$AB.A.B.BA4.A.B3.B4.
A.B.2A.2BA.A.2A2B$B.BA.A3.BAB2.2A.A2.A.B.A2B2.BA.3A.2ABA$B2A.AB.A.2B2A
2B.A3.B.BA2.2A2.AB.AB4.A$2A.A.A2.A.BABAB.2BA2B.B4.B.A3.AB.2AB.A$4B.B6.
2AB.2B.2BA2.A.A.B3.2B2.B2.B$4B2A2.A2.A2.B.BA2BA3.A3.ABA3.B.A3.B$AB7.B
.A2.A2.BAB.2A3.B2.B2.A2.2A3.B$2.3A.A.2B.A6.A4.AB.2B5.B.2B2.2B$A2B.A.A
B4.AB2.B3.B.2B.2A2.B.2AB5.2A$AB.5B.2B2.B.A3.A.A5.B.BA.2A.2AB$4.BA6.2B
2.B4.A.B.BAB.B2AB3.2ABAB$.3B2.A3BAB.ABA.2A.A2B.2A.BA.B2A2.BABA2B$4.BA
B2.A3.B2.AB2.AB.AB4.B2.A2.AB.2A$2B2AB.9A5.B7.A2BA3BA2.BAB$2AB.A3.B.A.
B5.2A.A3.B2.A3.2B.A2.BA$.A.A.A2B.2B.2AB.B2A.B2ABA3.A3.B.A.A2.A$3.A9.B
A2.A3B3.2A2.BA.B2A6.B$.BA2.B2A.3A.A3.A.2B2.A2.A.A.A2.B6.A$.3B.BA.BA4.
4B.2B.A5.A.A.2B4.2B$B3.A2.B.A.2B5.A2.A.2A2B.3BA.B3.A$.2B4.A.A2B3.BAB2A
.A.B2.B.BA.B2A.B3AB!

User avatar
rowett
Moderator
Posts: 4032
Joined: January 31st, 2013, 2:34 am
Location: UK
Contact:

Re: lifeviewer bug

Post by rowett » August 27th, 2024, 3:16 am

pifricted wrote:
August 27th, 2024, 1:49 am
???
Fixed, thanks!

User avatar
confocaloid
Posts: 4547
Joined: February 8th, 2022, 3:15 pm
Location: https://catagolue.hatsya.com/census/b3s234c/C4_4/xp62

Re: lifeviewer bug

Post by confocaloid » August 31st, 2024, 5:48 am

An additional complication with B0 NW is that B0 is not necessarily limited to strobing background. The NW... format allows to specify negative weights of neighbours. There can be two or more alive neighbours in neighbourhood positions whose weights add to zero (e.g. one alive neighbour in position weighted +1, one alive neighbour in a position weighted -1, and no other alive neighbours). Any such configuration would query the same birth condition (B0).

I don't know how much is explored re: CA with negatively-weighted neighbours, though.
confocaloid wrote:
August 31st, 2024, 5:32 am
What are known explored CA with negatively-weighted neighbours?
The NW... neighbourhood format allows to specify negative weights ("[...] The hexadecimal representation has the MSB as the sign bit [...]"). However, there seems to be little evidence of people actually using that feature.

User avatar
b-engine
Posts: 2223
Joined: October 26th, 2023, 4:11 am
Location: Somewhere on earth

Re: LifeViewer bug on mobile devices

Post by b-engine » October 10th, 2024, 6:01 pm

b-engine wrote:
April 4th, 2024, 2:19 am
There's a good chance that you can't use the pan function on mobile (maybe also happens in other touchscreen devices). When you tap somewhere in the viewer window, it seems to be like holding the "cursor".

EDIT: Had anyone noticed that this post yet?
This bug persists till now (only on Android touchscreen devices), and it's not fixed. Anyone else noticing the issue?
b-rules100th post: 18 November 2023 1000th post: 8 March 2024 10000th post:

Post Reply