JavaLifeSearch
 A for awesome
 Posts: 1901
 Joined: September 13th, 2014, 5:36 pm
 Location: 0x1
 Contact:
Re: JavaLifeSearch
The manual appears to mention the existence of "frozen unchecked" cells, which I should be able to create with X + I, but when I try that on my copy, nothing happens when I press "I". Is the problem with my copy of JLS, the manual, or my own misunderstanding?
x₁=ηx
V ⃰_η=c²√(Λη)
K=(Λu²)/2
Pₐ=1−1/(∫^∞_t₀(p(t)ˡ⁽ᵗ⁾)dt)
$$x_1=\eta x$$
$$V^*_\eta=c^2\sqrt{\Lambda\eta}$$
$$K=\frac{\Lambda u^2}2$$
$$P_a=1\frac1{\int^\infty_{t_0}p(t)^{l(t)}dt}$$
http://conwaylife.com/wiki/A_for_all
Aidan F. Pierce
V ⃰_η=c²√(Λη)
K=(Λu²)/2
Pₐ=1−1/(∫^∞_t₀(p(t)ˡ⁽ᵗ⁾)dt)
$$x_1=\eta x$$
$$V^*_\eta=c^2\sqrt{\Lambda\eta}$$
$$K=\frac{\Lambda u^2}2$$
$$P_a=1\frac1{\int^\infty_{t_0}p(t)^{l(t)}dt}$$
http://conwaylife.com/wiki/A_for_all
Aidan F. Pierce
Re: JavaLifeSearch
In case you hadn't figured it out yet, this seems to be an error in the documentation. 'i' and 'I' clear all unchecked cells in the selection, and 'o' and 'O' set all unset cells to unchecked. The frozen / unfrozen state is retained with 'i' and 'o' as indicated in the manual  you just need the opposite operation. As usual, 'Shift' applies the operation to all generations.
The latest version of the 5S Project contains over 221,000 spaceships. Tabulated pages up to period 160 are available on the LifeWiki.
 Apple Bottom
 Posts: 1027
 Joined: July 27th, 2015, 2:06 pm
 Contact:
Re: JavaLifeSearch
Here's a ZIP file containing a saved copy of the JAR file for 1.7 and the accompanying manual:Sarp wrote:It seems like the web page is broken, are there any alternative links?
If you speak, your speech must be better than your silence would have been. — Arabian proverb
Catagolue: Apple Bottom • Life Wiki: Apple Bottom • Twitter: @_AppleBottom_
Proud member of the Pattern Raiders!
Catagolue: Apple Bottom • Life Wiki: Apple Bottom • Twitter: @_AppleBottom_
Proud member of the Pattern Raiders!
Re: JavaLifeSearch
Thanks. I've updated the original post to link to your post.Apple Bottom wrote:Here's a ZIP file containing a saved copy of the JAR file for 1.7 and the accompanying manual
Matthias Merzenich
 Entity Valkyrie
 Posts: 247
 Joined: November 30th, 2017, 3:30 am
Re: JavaLifeSearch
How do I use JavaLifeSearch to find a suitable p3 reflector for this?
EDIT: This is p51.
Code: Select all
x = 29, y = 25, rule = B3/S23
18bobo$19b2o$19bo6$o$3o$3bo$2b2o11b2o11bo$15b2o9b3o$6b3o17bobo$4b2o20b
o$4b2obob2o$4b4o2bo$5bo4bo$6b4o$6b2o2$27b2o$28bo$25b3o$25bo!
Re: JavaLifeSearch
I'm not sure this problem is at a stage where JLS can be used to find a solution, but it depends very much on what you are trying to reflect, the timing of that reflection and where it needs to go. If I understand what you are trying to do correctly, then you want to use the p3 reflector to shuttle the glider which knocks out the FNG of the eastern herschel allowing the R> H progression to work. What you need to do first is work out the timing and output lane of the reflector that's required, and then survey all the known p3 reflectors to see if there's anything that matches. If you find something but it doesn't fit, then you can use JLS to find an oscillator which uses the same mechanism and also fits in the space that is available. If there's nothing that matches then it is going to be very hard to find something starting with just JLS.Entity Valkyrie wrote:How do I use JavaLifeSearch to find a suitable p3 reflector for this?
EDIT: This is p51.Code: Select all
x = 29, y = 25, rule = B3/S23 18bobo$19b2o$19bo6$o$3o$3bo$2b2o11b2o11bo$15b2o9b3o$6b3o17bobo$4b2o20b o$4b2obob2o$4b4o2bo$5bo4bo$6b4o$6b2o2$27b2o$28bo$25b3o$25bo!
If you do want to tackle this problem then the way to do it would be to set up JLS with a period of 51 gen, and manually set the as much of the pattern as possible until you have the input and output gliders defined throughout the interaction. In this case you may need to work forwards from Gen 0 and backwards from the last gen to work out where and when the interaction will take place. In the middle you'll need to leave a number of cells unconstrained (which is where the interaction will take place) and then border that region with cells constrained to be p3. To start with there should be a thin border of p3 cells surrounded by a larger area of Unchecked p3 cells. I tackle these problems by starting with as small an area as possible for the interaction and gradually increase that area when no results are found. You'll see that there are errors where signals (including gliders) come into and go out of the conduits. These errors can be resolved with Unset cells in the last generation.
You can save a lot of time in setting up these searches by pasting in a pattern from Golly into JLS, manually setting the unknown areas throughout the evolution and letting it work out the subsequent generations everywhere else. I've attached a JLS file which sets up this kind of search from an adapted version of the pattern on the Gun Discussion thread (with alternate p3 sparker) combined with the pattern here. With the current setup the search finds 0 solutions after about 3 minutes. Note the Sort order used (in particular "Process all cells in a generation first") and the use of "Use combinations of solutions to prune search" in the Search Options. The later option has no effect on this search as it's set up, but as you expand the search it's a very useful option.
I suspect that even if you manage to find a solution to this problem it's going to be very difficult to make it fit with all the other circuitry you require, for example, there's no way it can coexist with the 2G > H you used in the pattern from the Gun Discussion thread.
Good Luck
 Attachments

 B3S23p3_reflector_for_p51_conduit.zip
 Sample JLS setup for p3 reflector
 (17.92 KiB) Downloaded 210 times
The latest version of the 5S Project contains over 221,000 spaceships. Tabulated pages up to period 160 are available on the LifeWiki.
 Entity Valkyrie
 Posts: 247
 Joined: November 30th, 2017, 3:30 am
Re: JavaLifeSearch
Thanks for the file. I didn't know how to set up JavaLifeSearch until now.wildmyron wrote:I'm not sure this problem is at a stage where JLS can be used to find a solution, but it depends very much on what you are trying to reflect, the timing of that reflection and where it needs to go. If I understand what you are trying to do correctly, then you want to use the p3 reflector to shuttle the glider which knocks out the FNG of the eastern herschel allowing the R> H progression to work. What you need to do first is work out the timing and output lane of the reflector that's required, and then survey all the known p3 reflectors to see if there's anything that matches. If you find something but it doesn't fit, then you can use JLS to find an oscillator which uses the same mechanism and also fits in the space that is available. If there's nothing that matches then it is going to be very hard to find something starting with just JLS.Entity Valkyrie wrote:How do I use JavaLifeSearch to find a suitable p3 reflector for this?
EDIT: This is p51.Code: Select all
x = 29, y = 25, rule = B3/S23 18bobo$19b2o$19bo6$o$3o$3bo$2b2o11b2o11bo$15b2o9b3o$6b3o17bobo$4b2o20b o$4b2obob2o$4b4o2bo$5bo4bo$6b4o$6b2o2$27b2o$28bo$25b3o$25bo!
If you do want to tackle this problem then the way to do it would be to set up JLS with a period of 51 gen, and manually set the as much of the pattern as possible until you have the input and output gliders defined throughout the interaction. In this case you may need to work forwards from Gen 0 and backwards from the last gen to work out where and when the interaction will take place. In the middle you'll need to leave a number of cells unconstrained (which is where the interaction will take place) and then border that region with cells constrained to be p3. To start with there should be a thin border of p3 cells surrounded by a larger area of Unchecked p3 cells. I tackle these problems by starting with as small an area as possible for the interaction and gradually increase that area when no results are found. You'll see that there are errors where signals (including gliders) come into and go out of the conduits. These errors can be resolved with Unset cells in the last generation.
You can save a lot of time in setting up these searches by pasting in a pattern from Golly into JLS, manually setting the unknown areas throughout the evolution and letting it work out the subsequent generations everywhere else. I've attached a JLS file which sets up this kind of search from an adapted version of the pattern on the Gun Discussion thread (with alternate p3 sparker) combined with the pattern here. With the current setup the search finds 0 solutions after about 3 minutes. Note the Sort order used (in particular "Process all cells in a generation first") and the use of "Use combinations of solutions to prune search" in the Search Options. The later option has no effect on this search as it's set up, but as you expand the search it's a very useful option.
I suspect that even if you manage to find a solution to this problem it's going to be very difficult to make it fit with all the other circuitry you require, for example, there's no way it can coexist with the 2G > H you used in the pattern from the Gun Discussion thread.
Good Luck
Re: JavaLifeSearch
Could you please not quote entire pagelong posts just to add a single line of response to the bottom?